Ferrari Forum - View Single Post

02-13-2004, 10:11 AM

Thanks,

I have checked the rod and it is fine. Where the drift pin holds it into the door is okay. Opening the door fully open will pull the rod away from the roller and nothing is broken and the roller is not cracked. You can feel it pop with your finger when placed on the rod. I fully cleaned everything w/o taking the panel off (yet) and put some heavier grease in the detents of the rod, to no avail. The doors are aligned and the main hinges are tight. In the 328's that I have had in the past, just a good cleaning and new grease fixed it. It has not helped this one.

Thank You

Robert

02-13-2004, 10:11 AM	#3 (permalink)
Robert Mann Posts: n/a	Thanks, I have checked the Thanks, I have checked the rod and it is fine. Where the drift pin holds it into the door is okay. Opening the door fully open will pull the rod away from the roller and nothing is broken and the roller is not cracked. You can feel it pop with your finger when placed on the rod. I fully cleaned everything w/o taking the panel off (yet) and put some heavier grease in the detents of the rod, to no avail. The doors are aligned and the main hinges are tight. In the 328's that I have had in the past, just a good cleaning and new grease fixed it. It has not helped this one. Thank You Robert