Hi Carl,
actually very litt
Hi Carl,
actually very little turning of the screw is required..I don't remember making a mental note but likely in the 1/2 - 3/4 range would take it from 3% to 1%...
Basically one just turns the screw some amount ...1/2 turn say...then plug the hole and wait for everything to settlr in..and observe the gas readings...blip the throttle and observe...it probably takes 3-5 minutes of observation to be sure the numbers stabilize and continue to hold within a narrow range.
How is your setting & testing coming along?
Regards, JRV
|