Ferrari Forum - View Single Post

07-21-2007, 03:13 AM

OK I just had changed the outer bellows on the steering rack and now need to get the toe adjusted. I tried to keep the adjustment the same but as you know that is somewhat difficult. So off next week to get the toe adjusted .
So the question for the folks who have had this done is what did you set this to. The WSM and OM says :
E = F - 0.04" (1 mm) Min and E = F - 0.12" (3mm)
When I talked to my front end guy he said that he likes to se this as close to "0" as possible. So what are you guys setting this to. Oh this is for normal street driving and I'll either have the stock 14" rims or will use the 16" Gotti's. Thanks in advance.

07-21-2007, 03:13 AM	#1 (permalink)
Steve King (Steve) Posts: n/a	OK I just had changed the oute OK I just had changed the outer bellows on the steering rack and now need to get the toe adjusted. I tried to keep the adjustment the same but as you know that is somewhat difficult. So off next week to get the toe adjusted . So the question for the folks who have had this done is what did you set this to. The WSM and OM says : E = F - 0.04" (1 mm) Min and E = F - 0.12" (3mm) When I talked to my front end guy he said that he likes to se this as close to "0" as possible. So what are you guys setting this to. Oh this is for normal street driving and I'll either have the stock 14" rims or will use the 16" Gotti's. Thanks in advance.