1977 308 GT4 Timing belts

05-25-2007, 02:25 AM

I am not able to find the timing belts to raplace on my 308.
They are not stock ( see picture ) can anybody help ?
Alessandro.

05-25-2007, 11:39 AM

Call Daniel at Ricambi http://www.ricambiamerica.com/

or http://www.trutlands.com/ 770-493-8852

05-25-2007, 12:48 PM

He says they are NOT stock, that's the upgraded pulley sets using a different tooth profile...

You'll need to find the guy that engineered them...brb.........

05-25-2007, 01:49 PM

I'm back!

That pulley set was engineered and fabricated by this guy to use a more modern tooth design belt...

Scott McGehee
sandmdesign@comcast.net

916 496-7674

He's in California.....HTH

05-25-2007, 01:52 PM

OOPS sorry, maybe Nick can help try this.
http://www.nicksforzaferrari.com/for...bsite1_075.htm

05-29-2007, 07:59 AM

hey, guys. not me those are Ed Gaults original set-up. if i recall right he used a gates t218 belt.

05-29-2007, 08:01 AM

whats up with pic resize ???

05-29-2007, 10:55 AM

Ah....OK....thanks for that!

I had forgotten about Ed's system......

05-30-2007, 05:04 AM

Gates t218 is very long 239 teeth.
I think Ed-Gault used Gates T-212 that is 9.25 pitch.
Mine looks 8mm pitch.

06-02-2007, 07:18 PM

If you dont find it here, you got a problem...

http://www.contitech.de/ct/contitech...imingbelts.pdf

05-25-2007, 02:25 AM	#1 (permalink)
Alessandro Malanca (Lisander) Posts: n/a	I am not able to find the timi I am not able to find the timing belts to raplace on my 308. They are not stock ( see picture ) can anybody help ? Alessandro.

05-25-2007, 11:39 AM	#2 (permalink)
Mike Tuason (Miketuason) Posts: n/a	Call Daniel at Ricambi [url="h Call Daniel at Ricambi http://www.ricambiamerica.com/ or http://www.trutlands.com/ 770-493-8852

05-25-2007, 12:48 PM	#3 (permalink)
Alan Leach (Speedy308) Posts: n/a	He says they are NOT stock, th He says they are NOT stock, that's the upgraded pulley sets using a different tooth profile... You'll need to find the guy that engineered them...brb.........

05-25-2007, 01:49 PM	#4 (permalink)
Alan Leach (Speedy308) Posts: n/a	I'm back! That pulley s I'm back! That pulley set was engineered and fabricated by this guy to use a more modern tooth design belt... Scott McGehee sandmdesign@comcast.net 916 496-7674 He's in California.....HTH

05-25-2007, 01:52 PM	#5 (permalink)
Mike Tuason (Miketuason) Posts: n/a	OOPS sorry, maybe Nick can hel OOPS sorry, maybe Nick can help try this. http://www.nicksforzaferrari.com/for...bsite1_075.htm

05-29-2007, 07:59 AM	#6 (permalink)
scott mcgehee (Smg) Posts: n/a	hey, guys. not me those are Ed hey, guys. not me those are Ed Gaults original set-up. if i recall right he used a gates t218 belt.

05-29-2007, 08:01 AM	#7 (permalink)
scott mcgehee (Smg) Posts: n/a	whats up with pic resize ??? whats up with pic resize ???

05-29-2007, 10:55 AM	#8 (permalink)
Alan Leach (Speedy308) Posts: n/a	Ah....OK....thanks for that! Ah....OK....thanks for that! I had forgotten about Ed's system......

05-30-2007, 05:04 AM	#9 (permalink)
Alessandro Malanca (Lisander) Posts: n/a	Gates t218 is very long 239 te Gates t218 is very long 239 teeth. I think Ed-Gault used Gates T-212 that is 9.25 pitch. Mine looks 8mm pitch.

06-02-2007, 07:18 PM	#10 (permalink)
Chris Fricke (Tomdial) Posts: n/a	If you dont find it here, you If you dont find it here, you got a problem... http://www.contitech.de/ct/contitech...imingbelts.pdf

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode