308 Failure to start

F308O · 12-08-2007, 11:09 AM

I recently had the car serviced, the workshop had the flywheel skimmed and a new clutch plate fitted. The car stood in the workshop for 3 weeks, so the battery ran down. On reassembly the car would not start all electrical circuits test correct. Question Did the skimming of the flywheel damage the magnetic pick ups or did the flat battery maybe damage the digiplex control box?
Any comments will be appreciated.
Thank you

STEVE BOSWELL · 03-21-2008, 01:57 PM

did they place the flywheel in the correct position when they reinstalled it if they just put it on without aligning it to the proper sensor location it will spark but not at the right time

12-08-2007, 11:09 AM	#1 (permalink)
F308O Junior Member Join Date: Dec 2007 Posts: 1	308 Failure to start I recently had the car serviced, the workshop had the flywheel skimmed and a new clutch plate fitted. The car stood in the workshop for 3 weeks, so the battery ran down. On reassembly the car would not start all electrical circuits test correct. Question Did the skimming of the flywheel damage the magnetic pick ups or did the flat battery maybe damage the digiplex control box? Any comments will be appreciated. Thank you

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MSD failure	r turner (Snj5)	Ferrari Technical Questions & Answers	14	12-03-2005 05:01 AM
Boxer Speedo failure	Greg Markson (Gma365)	Ferrari Technical Questions & Answers	10	07-19-2004 10:38 PM
365 22 electrical failure	Les Thaler (Unregistered Guest)	Ferrari Technical Questions & Answers	0	06-30-2004 09:31 PM
Advanced Cold Start and Hot Start Problems HELP	Ken Ross	Ferrari Technical Questions & Answers	13	03-12-2004 10:42 AM
Emissions test failure question	Jeremy Lawrence	Ferrari Technical Questions & Answers	6	08-09-2003 04:50 PM

03-21-2008, 01:57 PM	#2 (permalink)
STEVE BOSWELL Junior Member Join Date: Mar 2008 Location: wyoming Posts: 2	did they place the flywheel in the correct position when they reinstalled it if they just put it on without aligning it to the proper sensor location it will spark but not at the right time

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)