348 AC E1 fault

10-03-2006, 05:23 AM

Mr A/C display was working fine - until i've removed dashboard and centre console to fix a few items. Now i've re-assembled - i've got an E1 fault showing - any ideas what this is?

10-03-2006, 06:50 PM

http://www.the348.com/tech/348.html#AirConditioning

It's for the temp sensor in your passenger compartment (driver's cockpit). Often it's just a grounding/connection problem with the pins that are behind the passenger air vent.

Remove each pin, clean, apply Stabliant 22a, and re-attach.

10-04-2006, 02:42 AM

Thanks - that makes sense as i had the dash removed recently - may be i've not connected something correctly or terminals need cleaning.

10-03-2006, 05:23 AM	#1 (permalink)
Jason Ryder (Candellara) Posts: n/a	Mr A/C display was working fin Mr A/C display was working fine - until i've removed dashboard and centre console to fix a few items. Now i've re-assembled - i've got an E1 fault showing - any ideas what this is?

10-03-2006, 06:50 PM	#2 (permalink)
No Doubt (No_doubt) Posts: n/a	[url="http://www.the348.com/te http://www.the348.com/tech/348.html#AirConditioning It's for the temp sensor in your passenger compartment (driver's cockpit). Often it's just a grounding/connection problem with the pins that are behind the passenger air vent. Remove each pin, clean, apply Stabliant 22a, and re-attach.

10-04-2006, 02:42 AM	#3 (permalink)
Jason Ryder (Candellara) Posts: n/a	Thanks - that makes sense as i Thanks - that makes sense as i had the dash removed recently - may be i've not connected something correctly or terminals need cleaning.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)