348 Dual mass flywheel rebuild

03-15-2004, 08:12 PM

Hello. I saw JRV's posts about dual mass flywheel rebuild on an F355. I recently did a similar clutch job on my 348 and am currently in the process of a major service. Thought you guys might like some pics of my dual-mass flywheel rebuild.

03-15-2004, 08:16 PM

Clutch pack disassembly:

03-15-2004, 08:21 PM

flywheel in bellhousing:

the culprit: gear lubricant leaking past shaft seals, still pooling inside the shaft bearing:

flywheel outer ring apart:

03-15-2004, 08:26 PM

flywheel open- what a mess!!!

disassembly and cleaning of all parts:

03-15-2004, 08:29 PM

disassembly and cleaning of all parts:

flywheel reassembled and ready to be packed with Kluber Grease:

Kluber grease - apply 250g

03-15-2004, 08:33 PM

flywheel packed:

screws removed from back to allow extra grease to express as bolts torqued:

03-15-2004, 08:36 PM

clutch pack reassembled and ready for bell housing:

replaced faulty shaft seals:

03-15-2004, 08:39 PM

reinstall bell housing and...go for a drive!

03-15-2004, 08:12 PM	#1 (permalink)
Shan Posts: n/a	Hello. I saw JRV's posts Hello. I saw JRV's posts about dual mass flywheel rebuild on an F355. I recently did a similar clutch job on my 348 and am currently in the process of a major service. Thought you guys might like some pics of my dual-mass flywheel rebuild.

03-15-2004, 08:16 PM	#2 (permalink)
Shan Posts: n/a	Clutch pack disassembly: [img Clutch pack disassembly:

03-15-2004, 08:21 PM	#3 (permalink)
Shan Posts: n/a	flywheel in bellhousing: [img flywheel in bellhousing: the culprit: gear lubricant leaking past shaft seals, still pooling inside the shaft bearing: flywheel outer ring apart:

03-15-2004, 08:26 PM	#4 (permalink)
Shan Posts: n/a	flywheel open- what a mess!!! flywheel open- what a mess!!! disassembly and cleaning of all parts:

03-15-2004, 08:29 PM	#5 (permalink)
Shan Posts: n/a	disassembly and cleaning of al disassembly and cleaning of all parts: flywheel reassembled and ready to be packed with Kluber Grease: Kluber grease - apply 250g

03-15-2004, 08:33 PM	#6 (permalink)
Shan Posts: n/a	flywheel packed: [img]http:// flywheel packed: screws removed from back to allow extra grease to express as bolts torqued:

03-15-2004, 08:36 PM	#7 (permalink)
Shan Posts: n/a	clutch pack reassembled and re clutch pack reassembled and ready for bell housing: replaced faulty shaft seals:

03-15-2004, 08:39 PM	#8 (permalink)
Shan Posts: n/a	reinstall bell housing and...g reinstall bell housing and...go for a drive!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode