355 Spider top Problems

03-12-2004, 08:37 PM

My wife came home, and while putting her top up on the 355, she stopped for a second. When she went to resume the operation, the top would not move. Ive tried going back and forth with it, but it wont move. What do i do?

03-12-2004, 08:41 PM

there is a tool of some sort for emergencies..it explains it in the owners handbook.

sounds like the seat microswitch may have gone bad, or gotten stuck..so also try moving the seat forwards & back.

03-12-2004, 08:48 PM

I tried the seat, it moves back and forth.

03-13-2004, 05:27 AM

Use the switch in the center between the seats, it is accessed through a panel on the center wall, fold the drivers seat forward. It is better explained in the manual. Often if you use that then try the normal procedure all is OK. But if not, the seat position sensor is at fault 90% of time.
Brian

03-12-2004, 08:37 PM	#1 (permalink)
allan Posts: n/a	My wife came home, and while p My wife came home, and while putting her top up on the 355, she stopped for a second. When she went to resume the operation, the top would not move. Ive tried going back and forth with it, but it wont move. What do i do?

03-12-2004, 08:41 PM	#2 (permalink)
JRV Posts: n/a	there is a tool of some sort f there is a tool of some sort for emergencies..it explains it in the owners handbook. sounds like the seat microswitch may have gone bad, or gotten stuck..so also try moving the seat forwards & back.

03-12-2004, 08:48 PM	#3 (permalink)
allan Posts: n/a	I tried the seat, it moves bac I tried the seat, it moves back and forth.

03-13-2004, 05:27 AM	#4 (permalink)
Brian Stewart Posts: n/a	Use the switch in the center b Use the switch in the center between the seats, it is accessed through a panel on the center wall, fold the drivers seat forward. It is better explained in the manual. Often if you use that then try the normal procedure all is OK. But if not, the seat position sensor is at fault 90% of time. Brian

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)