TRbrake bleeding made easy

08-16-2004, 09:43 PM

Today, I recieved my one-man brake bleeding system, from Motive Products. One of the adapters fit the TR. I used about 10 PSI pressure, and was able to bleed all the brakes, in just minutes, all by myself.

This is a great product.

08-17-2004, 08:39 AM

I only use about 4 PSI to bleed my brakes. But Motive PowerBleeder works great!

08-17-2004, 05:11 PM

Mitch,

I wasn't sure of the pressure. Next time I will use 4-5 PSI.

Thanks

08-18-2004, 06:58 AM

Any postive pressure will work, the lower pressure will have a slower rate of flow which will help eliminate cavitation at the bleed nipple.

08-16-2004, 09:43 PM	#1 (permalink)
Henryk (Henryk) Posts: n/a	Today, I recieved my one-man b Today, I recieved my one-man brake bleeding system, from Motive Products. One of the adapters fit the TR. I used about 10 PSI pressure, and was able to bleed all the brakes, in just minutes, all by myself. This is a great product.

08-17-2004, 08:39 AM	#2 (permalink)
Mitch Alsup (Mitch_alsup) Posts: n/a	I only use about 4 PSI to blee I only use about 4 PSI to bleed my brakes. But Motive PowerBleeder works great!

08-17-2004, 05:11 PM	#3 (permalink)
Henryk (Henryk) Posts: n/a	Mitch, I wasn't sure of Mitch, I wasn't sure of the pressure. Next time I will use 4-5 PSI. Thanks

08-18-2004, 06:58 AM	#4 (permalink)
Brian Stewart (Indy) Posts: n/a	Any postive pressure will work Any postive pressure will work, the lower pressure will have a slower rate of flow which will help eliminate cavitation at the bleed nipple.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)