Ferrari Forums banner
1 - 4 of 4 Posts

Discussion Starter · #1 ·
I know everyone recommends the

I know everyone recommends the Baldwin or UFI, but they're hard to locate in town. I found a source but cannot get the filter until next week.

Well, tonight I'm taking the car over to a friends shop to put it on a lift and replace that broken clutch cable, and I figured while I got it up there we'd drain the oil and replace it as well. I saw in the tech. articles write up that FRAM also makes a filter that will fit, but several people have mentioned that FRAM filters are not that good. Peurolator also makes a filter that will fit the 308, and is a better filter than FRAM and I've found one here in town and was just going to use that, and use the Baldwin on my next oil change.

Has anyone used the Peurolator filter or know and any problems using it. I don't see why it would be a problem. I mean if it doesn't fit or something I'm pretty much going to know right away.

I was also going to put Valvoline Synthetic 20W50 in it. I used it exclusively in my race car and my engine looked beautiful on the insides between rebuilds.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.