Ferrari Forums banner
1 - 1 of 1 Posts

Discussion Starter · #1 ·
Just completed 30K service and

Just completed 30K service and replaced all gaskets and seals recommened.

Now I have a leak at the rear main area rear of the pully( where the woodruff key inserts). I replaced the seal and still have the leak.

It appears the leak is coming from the inner shaft (where the woodruff key inserts) . Is there a seal or O ring I am missing or possibly is this an indication of a bearing failure?
I can wiggle the shaft with my hand and get some end play and oil does come out when I do that.
The motor was factory replaced in 1984 and only has 12K on it.

Any suggestions

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.