[Guest]

Hello Gentlemen:

I am tryin

Hello Gentlemen:

I am trying to replace the coolant header (expansion) tank in my US 84 308QV. The Ferrari UK site lists 121647 (under 84-85 model year) and 114475 (for 82-84 model year). Since my model year falls into both categories, I took the 50/50 shot and first ordered 121647 and it was the wrong one, so I then ordered 114475 and I basically got the exact same tank back except it came with a radiator cap.

Both 121647 and 114475 I got have 2 threaded fittings on the side for the temp sensor, my stock one only has 1 fitting. Secondly my stock one has a plate underneath to which a valve with 2, 5/8" water hoses come in and out, is bolted onto. The 2 I got from Dennis McCann only have a flat surface underneath.

Does anyone have detailed knowledge of the difference in the 2 part numbers and which one is the stock one I am describing ?

many thanks,

Oleh

 

[Guest]

Oleh, welcome to Ferrari-Talk.

Oleh, welcome to Ferrari-Talk.

Call Lee at Algar (800-441-9824)and describe your problem...tell him JR @ Pinnacle Motorsports in Houston reffered you.

The header tank you are describing as correct for your car sounds like the tanks used on Mondials. Lee will know for sure though.

Regards, JRV

 

[Guest]

JRV,

Thanks for the quick r

JRV,

Thanks for the quick response and the referral. Great board as well, continued success !! Will keep you posted as to what the actual PN is for these '84 for future refernce on the board,

Thx again,

Oleh