Ferrari Forums banner

348 Dual mass flywheel rebuild

2558 Views 7 Replies 0 Participants Last post by  Shan
G
Hello. I saw JRV's posts

Hello. I saw JRV's posts about dual mass flywheel rebuild on an F355. I recently did a similar clutch job on my 348 and am currently in the process of a major service. Thought you guys might like some pics of my dual-mass flywheel rebuild.

See less See more
1 - 8 of 8 Posts
G
Clutch pack disassembly:
[img


Clutch pack disassembly:
See less See more
G
3
flywheel in bellhousing:
[img


flywheel in bellhousing:



the culprit: gear lubricant leaking past shaft seals, still pooling inside the shaft bearing:



flywheel outer ring apart:
See less See more
G
3
flywheel open- what a mess!!!

flywheel open- what a mess!!!



disassembly and cleaning of all parts:


See less See more
G
3
disassembly and cleaning of al

disassembly and cleaning of all parts:



flywheel reassembled and ready to be packed with Kluber Grease:


Kluber grease - apply 250g
See less See more
G
2
flywheel packed:
[IMG]http://


flywheel packed:


screws removed from back to allow extra grease to express as bolts torqued:
See less See more
G
3
clutch pack reassembled and re

clutch pack reassembled and ready for bell housing:


replaced faulty shaft seals:

See less See more
G
reinstall bell housing and...g

reinstall bell housing and...go for a drive!
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top