[Guest]

after an alternator glitch, th

after an alternator glitch, this car fried the rea connector block. i have replaced the alternator (new0 battery and connector block. All wiring is intact, connections are solid at the front block, power to both relay boards, power to ignition switch. problem appears to be a failure at or to the dash/starter system. Alarm seems to function, the air bag light will show then go out, otherwise no display or register on dash, no crank signal to starter, I don't know if ignition is hot.
Appreciate some suggestions, the wiring shows many junction points except for their location in car.

Brian

 

[Guest]

check the fuse block & cha

check the fuse block & change the wiring to the fuel pump to the next fuse (to the right, not used on 355's, from 348's) see what happens.

 

[Guest]

traced to problem in area of i

traced to problem in area of ignition switch wiring. Car is perfect now. thanks.
Brian