Ferrari Forums banner
1 - 2 of 2 Posts

Discussion Starter · #1 ·
Is there a proper way to dis-a

Is there a proper way to dis-assemble the dist. of a 2v 308. I want to have a look at the advance mechanism to make sure it is all clean. On the back of the dist. there are 6 screws and a C-clip around the shaft. How does it come apart after removing them all?
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.