Good heatresistant Adhesive

1385 Views 2 Replies 0 Participants Last post by Anthony A., Dec 30, 2003

Discussion Starter · Dec 27, 2003

Hi,

...just cleaning up som

Hi,

...just cleaning up some loose ends this winter

with my car(among other things)and I would like to re-attach the small carpet pieces on the underside of my engine bonnet. It looks like someone had tried to re-glue them with non-optimum results - the pieces start to fall off once the glue becomes warm after driving.

What should I use to remove the old adhesive and what would be a good product to use to glue them back. I have a standard contact cement for rubber, metal etc, but not sure of it's heat tolerance.

Any suggestions would be appreciated.

Thank You,

Anthony

Save

1 - 3 of 3 Posts

Discussion Starter · #2 · Dec 30, 2003

Hi Anthony,

3M makes a very

Hi Anthony,

3M makes a very durable high temp Yellow Weather Strip Adhesive that should work well if applied properly. Clean up the old glue with Acetone.

Save

Discussion Starter · #3 · Dec 30, 2003

Thank You!

Thank You!

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month