Ferrari Forums banner

Looking for short bullit style muffers

1932 Views 5 Replies 0 Participants Last post by  r turner
G
I am looking for stainless &#3

I am looking for stainless "bullit" style muffers and can't be any longer than about 12 or 13 inches, with an outer diameter of about 3 inches or maybe slightly more. I've searched the net but find mostly stuff for the Asian import cars. Anybody know of a source for something like this? Thank You.
1 - 6 of 6 Posts
G
Thank You David...I visited th

Thank You David...I visited those sites, no luck. I've been told that Magnaflow has just released a stainless glasspack style muffler in various sizes...I'll try and find out more.
G
Jeff -
Stebro makes a fiberg


Jeff -
Stebro makes a fiberglass straight through muffler that happens to fit the same size mounts as a Ferrari cat if that is applicable.
They call it a 'Euro - resonator'.
Let me know if you need more details.
best
rt
G
Thank You r turner;

A frien


Thank You r turner;

A friend of mine who owns a brake and muffler shop can get Magnaflow bullit mufflers in just the size I wanted, so that may be the route I'm going. I thought about putting resonators where the cats are, but on a TR there isn't enough room to make a turn outward towards the back for tail pipes, they would have to stick out farther than I want. I will check out the Stebro Euro Resonator just to make sure....again Thank You for the information.
G
Jeff
Sounds like the custom M


Jeff
Sounds like the custom Magnaflow is the way to go, as your friend may do it more cost efficiently than Stebro.
Oddly enough to me, replacing the cat with the stebro resonator did not make the car any louder, although I already had a tubi which is almost too loud, but a great great sound.
The Stebros will bolt in and replace the cats and should have no effect on your exhaust system mounting afterwards.
Good luck and we're all interested in the results!!
best
Russ
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top