Ferrari Forums banner
1 - 2 of 2 Posts
G

·
Discussion Starter · #1 ·
hello I have a F348 and always

hello I have a F348 and always little troubles with AC control panner, with ignition, with doors gaskets or To bearing seal....
I know that ferrari sent to the Ferrari dealers recall campains documents to modify some little things like the oil temp indicator.....
would someone have it ?
 
G

·
Discussion Starter · #2 ·
Hi Cheneviere,
welcome aboa


Hi Cheneviere,
welcome aboard

you should be able to call any dealer and get the full details from the service dept. personel.

The most important recall I'm aware of is the replacement of the aluminum ended fuel lines with the steel ended versions. The aluminum nuts on the ends can & do crack, leading to serious fuel leak issues.

I've never heard of an AC recall/update from the factory, but the 30A fuse holder issue for the system is well known & upgraded permanent repair dicumented below in the Tech Archives.

As to the TO Bearing situation, again this is not a recall, as far as I'm aware, but an update mandated by the lack of replacement parts for 348's & early 355's. The fix of course is expensive because all new Late 355 parts must be used in place of the early parts.

The other things you mention I'm not familiar with, if you have more info please share.


Regards, JRV
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top